| Jesus is Lord |
Classic
Arms Inc. P.O. Box 125 • Indian Trail, NC 28079 Hrs: Mon-Fri 9-5 Eastern |
 |
ORDERS
1-704-684-0650
FAX 1-704-469-5775
|
ORDERS
1-704-684-0650 |
|
|
|
What is going on with Saiga's ?
Well, Here We Go Again !
 |
 |
 |
 |
Note: Tons of new Saiga accessories
on the accessory page. Check it out.
SEE SPECIAL PROMOTION ABOVE
.223 CALIBER...ITEM # SAIGA-223-16 ...319.99
- 4 or More..$309.99 each
545X39 CALIBER..ITEM # SAIGA-545-16 ..319.99-4 or More..$309.99
each
7.62X39 CALIBER...ITEM # SAIGA-762-16 ..319.99-4
or More...$309.99 each
.410 GA. SHOTGUN..ITEM # SAIGA.410..Special........
Out Of Stock
All of the Saiga firearms above are new in factory boxes
with factory accessories.
Rifles are 16.5" barrels Shotgun barrel is 19"
Special Deal --Original Saiga 7.62x39 factory
10 round mags..
Item # Saiga-Mag..$14.99
Saiga Target Barrel Rifles
We have a few of each of the following Saiga Rifles in
the 20" barrel configuration. Why get a 20" barrel. Well typically
the longer barrel provides a longer site radius and greater accuracy as well
as slightly increased velocity and footpounds of generated energy.
They also have slightly less bullet drop over a longer range making for a flatter
trajectory.
We have the following calibers available at the following prices.
Saiga .223 20" bbl W / 300 Meter Sights...... #Saiga-223-20....$349.99
Saiga 5.45x39 20"bbl W / 300 Meter Sights...#Saiga-545-20......$349.99
Saiga 7.62x39 20" Bbl W / 1000 Meter Sights...#Saiga-762-20....$369.99
* Note - The rear leaf sites on the .223 and 5.45 rifles
are marked as any typical saiga with pre-sets at 100 through 300 meters. For
some reason the 7.62x39 calbers in the long barrels are marked with pre-sets
from 100 to 1000 meters
----------------------------------------------------------------------------------------------------
- 
- 
- 
Saiga 12 Gauge Shotguns
THESE
FINE FAST HANDLING RUSSIAN MADE 12 GAUGES ARE ALL THE RAGE RIGHT NOW.
SEMI-AUTO ...COMES COMPLETE WITH A 5 ROUND MAG AND CHAMBERED FOR 2 3/4 AND 3"
HIGH CAP MAGS, DRUMS AND MANY OTHER ACCESSORIES ARE AVAILABLE.
In Stock Now
Ask for Item # Saiga-12N.....$549.99
OR
SAIGA 12 GAUGE AK VARIANT
Contains sufficient U.S. Parts to be fully 922r Compliant.
THESE SHOTGUNS HAVE BEEN CONVERTED HERE IN THE U.S., BY ONE
OF THE FINEST LICENSED MANUFACTURERS IN THE SOUTHEAST. THEY USE ALL U.S. MADE
PARTS TO INCORPORATE AN AK RIFLE STYLE BUTTSTOCK AND PISTOL GRIP INTO A FIREARM
THAT IS FULLY 922R COMPLIANT. THE FACT THAT THE TRIGGER TRANSFER BAR HAS BEEN
ELIMINATED, AND THE TRIGGER MOVED FORWARD ON THE WEAPON, SHOULD MAKE FOR AN
EVEN MORE RELIABLE AND QUICK FUNCTIONING FIREARM. THESE POWERHOUSE SHOTGUNS
HAVE A GREAT LOOK AND FEEL AND ARE EXTREMELY COMFORTABLE TO SHOOT.
SHOTGUN COMES COMPLETE WITH 1- 5 ROUND MAG. FEATURES INCLUDE 3" CHAMBERS,
THREADED MUZZLE,
AS WELL AS A BLACK SYNTHETIC BUTTSTOCK AND PISTOL GRIP.
These are the Bomb!!!!!
FIREARMS WILL SHIP NEW IN BOX WITH ALL YOU SEE ABOVE
ITEM #
SAIGA-12GA-AKV- $899.99.....$799.99
ORDER
ON-LINE NOW!
Saiga Accessories
The Dupont™ composite/glass-filled polymer was specifically chosen to provide us with an extremely durable, internally slick, fast feeding mag that will provide years of service. The springs are slightly longer to provide a more uniform pressure and are specially coated to provide smoother action along with resisting moisture.
All of our mag designs are tested for perfect fit, smooth, fast, reliable feeding and durability. Continuous smooth feeding is mandatory; therefore, we tested our mags with a variety of ammo from various manufacturers. Knowledge Gained Was Knowledge Used. Our Mags Feed Flawlessly! Ammunition used for testing included: American Eagle – Bernaul – Brown Bear – Federal – Fiocchi – Golden Tiger – Hornady – New Lake City – Remington – Seller & Bellot – Speer – Ultramax – UMC – V Max – Winchester – Wolf. (All of the fore mentioned companies are either registered or trade marked.)
Each mag is sealed in a 4 mil plastic
sleeve with mag warranty information enclosed.
S.G.M. offers complete Tech Support as well as a five year free factory replacement
policy.
Note *All S.G.M. mags are U.S. made and will act as 3
compliance parts. Sale and possession of the high cap mags and or drums are
legal where allowed by state law butindividual should be responsible for insuring
that their own rifle or shotgun in compliant with Sec 922r, before installing
high cap mags into the firearm.
Saiga.308 Caliber 25 round Polymer Mag Item # SSGMP30825.....$39.99 |
 Saiga 7.62x39 30 rd Polymer Mag Item # SSGMP76230....$29.99 |
 Saiga .223 30 rd Polymer Mag Item # SSGMP22330....$29.99 |
Saiga Shotgun Mags
All of the same info we have posted above pertaining
to our Saiga rifle mags also pertains to our Saiga Shotgun Mags.
All are in stock now... Sec 922r may apply to the installation of high cap mags.
Customer assumes responsibility for compliance.
 Saiga .410 gauge Polymer Mag 15 round capacity Item # SSGMP41015................$47.99 |
 Saiga .12 gauge Polymer Mag - 4 different capacity options available. 2 Rd - Item # SSGMP1202....$29.99 / 8Rd Item# SSGMP1208...$39.99 10 Rd - Item # SSGMP1210...$33.99 / 12Rd Item# SSGMP1212...$44.99 |
Saiga .223 100 Rd. Dual Drum Mag
 |
These are virtually
indentical to the popular Beta type AR-15 style Dual Drum Mags but manufactured
to work with the ever popular .223 caliber Saiga Rifles. We were terribly
impressed with the remarkable feat of engineering that the manufacturer
put into these to adapt them to the Saiga Rifle. We were even more impressed
with the way that they worked... They functioned flawlessly.
Manufactured for use in 922r compliant firearms only. Sales and possession are perfectly legal. Buyer assumes all liability for use and installation in compliance with state and federal law. Item # SGMT223D100...............$164.99 |
Saiga Muzzle Breaks by S.G.M.
Our S.G.M. Muzzle Breaks are all designed to simply screw on
to the existing threads of your favorite Saiga Shotgun.
All steel construction, not only do these look great but they work great in
evenly dispersing the gas blast, and keeping the barrel rise to a minimum while
reducing felt recoil.
 The Pro Muzzle Break for .410 gauge Saiga Item #SGMT410P......$42.00 |
 The Pro Muzzle Break for .12 gauge Saiga Item #SGMT12P......$42.00 |
 The Saber Boss Muzzle Break for .410 gauge Saiga Item #SGMT410SB......$45.00 |
 The Saber Boss Muzzle Break for .12 gauge Saiga Item #SGMT12SB......$45.00 |
 The Gunner Muzzle Break for .410 gauge Saiga Item #SGMT410G......$42.00 |
 The Gunner Muzzle Break for .12 gauge Saiga Item #SGMT12g......$42.00 |
Saiga Shotgun Choke Sets
 Saiga .410 Shotgun Chokes. This is a tri-pack consisting of 3 different choke tubes. Designed to screw onto external threads on barrel. You will get chokes in Extra Full, Full and Modified. All are Black Oxide, 4150 Steel, 40 Rockwell, Chrome Lined, W / Gold Lettering Item # SGMT410TP.................$92.00 |
 Saiga .12ga Shotgun Chokes. This is a tri-pack consisting of 3 different choke tubes. Designed to screw onto external threads on barrel. You will get chokes in Extra Full, Full and Modified. All are Black Oxide, 4150 Steel, 40 Rockwell, Chrome Lined, W / Gold Lettering Item # SGMT12TP.................$92.00 |
S.G.M. Tactical Stock Set
 |
Designed especially for Saiga's and AK-47's. It has the balance and hefty look that the AK needs and works great on the Saiga. Infinite adjustibility on its picatinny based slide system. Goes from 9-1/2" length of pull to 14-1/2" length of pull. Its recoil pad reduces felt recoil by 50%. Made in the U.S.A. so counts as a compliance part. It's tucked away up front trigger system is easy to reach and won't hang up on clothing, vests, slings etc. Manufactured of glass filled Zytel for superior strength. A rubber pad covers the three cavitities for storage of batteries, cleaning brush and cleaning kit. (Not supplied) Ambidextrous Cheek Rest is also available. Back locking plate with sling shots, castle nut, and wrench are included. Top Sling Mount built in. Lower Picatinny Rail
for sniper mono pod, flashlight, and sling mount etc. |
Saiga Recoil Pad
 |
Manufactured exclusively to fit the Original Saiga stocks on both the rifles and shotguns. These are really nice. Reduces felt recoil by 45%. Made in the U.S.A.... Your shoulder will thank you. Item # SGMTRP .......................$19.99
|
More Great Saiga Accessories
BACK IN STOCK NOW
PRO MAG 10 ROUND MAG FOR SAIGA 12 GA.
THESE ARE THE HIGHLY POPULAR 10 ROUND MAGS FOR THE SAIGA SHOTGUN.
THEY ARE NOT ORIGINAL BUT ARE MADE HERE IN THE U.S. BY PRO MAG. SALE AND POSSESSION
OF THESE MAGS IS PERFECTLY LEGAL BUT STATE AND FEDERAL REGULATIONS ON THE LEGAL
USE OF THESE MAGS IN A SAIGA SHOTGUN MAY VARY .
PURCHASER ASSUMES ALL RESPONSIBILITY FOR ABIDING BY THE LAW.
ITEM # ..SAIGA12-10MAG............................$29.99
ORDER
ON-LINE NOW!
WHAT ABOUT THIS
SAIGA 12 GA 20 ROUND DRUMS
- 
Saiga 20 Round Drum Mags proudly manufactured in the good ol U.S.A.
These are super nice and perform flawlessly.
They are all the rage on You Tube.
Nothing say's firepower like a 20 round 12 gauge drum.
Your choice of clear front , or smoke front ( viewable )
or solid black finish.
Clear -----Item # Saiga-20C-D.........$99.99
Smoke---Item # Saiga-20S-D........... $99.99
Black-----Item # Saiga-20B-D...........$99.99
ORDER
ON-LINE NOW!
LOOK AT THESE GREAT SAIGA ADDITIONS
|
SAIGA / AK ERGONOMIC GRIP  This grip is based off the factory Molot style grip used on the Molot Vepr 12 shotgun. It is basically the same as the factory Izhmash grip but with added finger grooves. We are offering a lifetime warranty on this grip. Our grip drastically out performed the factory Izhmash grip during torture testing. This grip is made in the USA using American made materials. Even the injection molds are made in the USA, in house, by MD Arms, Ltd.! We could have had the molds made over seas (sadly like a lot of companies have to do these days to stay competitive) for a fraction of the cost, but to hell with that! We are keeping our money and jobs right here and at the same time making higher quality molds and molded parts! Our grip will fit AK-47, AK-74, and RPK variants, Russian Izhmash Saiga shotguns and rifles that are pistol grip converted, and the PK (PKM) machine guns. ITEM # MOLOT GRIP....... $12.00 ORDER ON-LINE NOW! |
STAINLESS SAIGA PISTON 
This piston is intended as a US made replacement for the 12, 20, and .410 gauge factory Saiga piston. It counts as a 922 compliance part. High precision machined from pre-hardened stainless steel. It features a concave ring in the face to reduce gas loss around the piston during pressurization which makes it slightly more efficient than the factory part. The increase in efficiency should not be considered as a increase in reliability. If that is what your looking for please take a look at our Saiga Booster Piston by clicking here. The Stainless piston is stamped both with "MD Arms" and a "S" under it and counts as one US made 922 compliance part. ITEM # SS-PISTON........$9.99 ORDER ON-LINE NOW! |
SAIGA BOOSTER PISTON  The MD Arms Saiga Booster Piston is the first of it's kind. It is the only Saiga piston available that will greatly increase the cycling power of your 12, 20 or .410 gauge Saiga shotgun when using cheap low power ammo. It is a great piston for use during the break-in period of your gun as well . Good for competition shooters that want to ensure a stronger ejection from low power ammo as well. The piston is coated in a very high temperature diamondized coating for wear and corrosion resistance. It also features a concave ring in the face to reduce gas loss around the piston during pressurization. The Booster piston is stamped "MD Arms" and counts as one US made 922 compliance part. PLEASE NOTE: If your Saiga doesn't have problems ejecting low power ammo fired from the hip out of a fully loaded MD-20 20rd drum this isn't the piston for you and our Stainless Saiga Piston will better meet your needs. The Booster piston is not recommended for use with high power ammo unless you have replaced the factory gas plug with the MD Arms V-Plug. Using high brass ammo in combination with the Booster Piston and the factory gas plug will over work the system. Also please note that although the increase in cycling power is significant it is still not enough to account for a missing gas port in your Saiga. ITEM # SB-PISTON.......$15.99 |
DRESS YOUR SAIGA 12 UP WITH
A COOL MUZZLE BREAK.
- 
Saiga 12 Guage Flash Hiders / Muzzle Breaks
The first photo above is AR-15 birdcage style and the second is the original
Izhmash style.
Both are Made in the U.S.A. and do count as a 922 compliance parts. This comp
is
manufactured from high quality material with great attention to detail.
No gunsmithing required. Controls barrel rise during rapid firing.
They look great on the weapon too.
These are fantastic.
AR-15 BIRDCAGE STYLE....ITEM # SAIGA-BCFH....$34.99
IZHMASH STYLE............ITEM # SAIGA-ISFH...........$34.99
ORDER
ON-LINE NOW!
MORE GREAT SAIGA ACCESSORIES
MD ARMS GAS ADJUSTMENT SAIGA V-PLUGS
If you only make one change or addition to your Saiga-12, the MD Arms V-Plug
should be it!!! Anyone that owns a Saiga-12, from a full length IZ-107 down
to a 8" Short Barrel Shotgun, will benefit from the MD Arms V-plug no matter
what ammo you use.
The V-Plug plug has many improvements over the factory plug and other aftermarket plugs. Installs in minutes simply by unscrewing the factory plug and screwing the V-Plug back in.
The V-Plug has 5 settings compared to the factory's 2!
Why do you need to replace the factory
gas plug with the MD Arms V-Plug? To prevent damage and accelerated wear to
your gun and it's parts. Because even at best, the factory plug with it's limited
two settings, leaves your Saiga-12 over gassed with some makes of ammo. Also,
depending on your specific gun, the factory plug may allow low brass to function
on the high brass setting. If so, that means you basically have a one setting
Saiga-12, that is majorly over gassed with everything but low brass... This
is mostly to blame on the random start of the threading on the factory plug
and in the gas block (please view comparison pics below). Another source of
the blame is that the factory plug only has 2 settings. For example, the PKM
and RPD have 3 gas settings and fire rifle ammunition that has A LOT less variation
in powder charge and projectile weight from one type to the next when compared
to the vast array of 12ga ammunition types in 2 3/4", not even considering
the array of 3" types. The 2 setting factory Saiga-12 plug isn't even close
to sufficient for the variations of 12ga ammo. When on
the low brass setting the MD Arms V-Plug plug better utilizes the gas from the
low power ammo,
slightly increasing the cycling power of the gun.
And the biggest benefit of the V-Plug is it has 4 different medium to high brass settings. Unlike the factory plug, the V-Plug allows you to adjust the gas system to prevent the high power ammunition types from over gassing your system. The MD Arms V-plug is second to none when considering both factory and aftermarket plugs, in regards to regulating the gas flow in your Saiga-12, PERIOD!
Other improvements of the MD Arms V-Plug...
We could start threading in the same place on every V-Plug but because the factory threads in the gas block are random it is impossible to make the plug stop at the same point in every gun. With the factory and other aftermarket plugs you can lose settings because the plug has to be backed out to far to reach it's settings. With other aftermarket plugs your setting spectrum can be split in half not allowing them to be used in a graduating scale, making your setting spectrum confusing. The MD Arms V-Plug has 2 complete sets of it's 5 settings spectrum opposite of each other. This ensures the V-plugs settings can be used in a graduating scale in every gun and also prevents the loss of settings from having to back it out to far. The MD Arms V-Plug is the ONLY plug to offer this consistency!
The V-Plug has a shallow pocket in it's face. This allows for much more plastic fouling to accumulate without it interfering with the piston or ports, unlike the factory or other after market plugs. This pocket also helps plastic fouling better burn up increasing it's surface area to the hot gasses. And reduces plastic fouling in the threads by better directing it away from them.
It is finger adjustable, unlike the factory plug which requires the locking pin to be depressed with a tool to change settings. You can turn the V-Plug by hand without manually depressing the locking pin. And if it does become to hot or to tight from dirty threads to adjust by hand it has over-sized tool slots that will easily except a variety of different pry tools. The V-Plug also has a band in front of the threading that is slightly thicker to better seal off fouling from the threads.
The V-Plug is hands down
the best Saiga-12 plug available!
ITEM # V-PLUG.......$24.99
ORDER
ON-LINE NOW!
Russian Vepr Rifles
- 
Saiga Rifles........Vepr Rifles
Russian Vepr Rifles
Step Up To Quality
All Standard Vepr Rifles have micrometer adjustable rear sites for windage
and elevation
- 
These are Gorgeous, These are Colossal, These are Stupendous
There are Really, Really, Nice
The Russian Vepr is a premium Grade Semi-Auto Rifle with
premium High Grade Walnut wood furniture, heavy target barrels and a more traditional
styling.
We have had these in the past and they were extremely popular. Now we have small
quantities of the following Calibers and variations back in stock.
No Collection is complete without one.
- 
Each Vepr Rifle has a side Rail for easy
Scope Mounting - High Quality Checkering
on Grip and Forearm
Different Caliber options and Barrel Lengths for Hunting, Sporting Use, or Long
Range Target Applications
Here Are Your Choices
Intermediate Calibers
Vepr 7.62x39 Cal, 16.5" bbl, 1-5 and 1-10 Rd mag & acc's
Item # Vepr-39-16..............$699.99
Vepr 5.45x39 Cal, 16.5" bbl, 1-5 and 1-10 Rd mag & acc's
Item # Vepr-545-16..............$699.99
Vepr .223 Cal, 16.5" bbl, 1-5 and 1-10 Rd mag & acc's
Item # Vepr-223-16..............$749.99
Vepr .308 Cal, 16.5" bbl, 1-5 and 1-10 Rd mag & acc's
Item # Vepr-308-16..............$799.99
Large Calibers
Vepr .308 Cal,
20" bbl, 1-5 and 1-10 Rd mag & acc's
Item # Vepr-308-20..............$799.99
Vepr 7.62x54r Cal, 20" bbl, 2-5 Round
mags & acc's
Item # Vepr-54R-20..............$899.99
Vepr 7.62x54r Cal, 23" bbl, 2-5 Round
mags & acc's
Item # Vepr-54R-23..............$899.99
Scope It Up
Remember our UTG model 978 Scope mount fits All Vepr
Rifles
UTG
978 SIDE RAIL AK SCOPE MT
• New Gen. AK Double Rail Side Mount Designed with Quick
Detachable/Lock Lever
• Fully Adjustable for Most Side Rail Variants
• Precision Machined to Fit Most AKs and AK Variants
• Machined from Aircraft Grade Aluminum for Extreme Strength
• Double Picatinny Rails for Scope & Versatile Accessory Applications
• STANAG Dimension and 12 Slots on Top Rail, 8 Slots on Side Rail
• Optimal Clearance to Fit All Tactical Scopes Right on Top of Bore Centerline
ITEM
# UTG-MNT978..................$29.99
Introducing - The Vepr Super .308
Vepr .308 Super Limited Edition Target/Sniper
Rifle
- 
Gorgeous wood and beautifully checkered............Photo above shows
mount ( included ) with optional scope.
- 
- 
Vepr Super 308 .308Cal, 21" bbl,
1-5 and
1-10 Rd mag, manual, and a Free Factory Scope Mount.
This is one of the nicest rifles I have seen come along in a
long time with true innovative improvements on standard AK characteristics.
Rifle features a collector grade walnut flat bottom target stock. Improved trigger
with crossbolt safety and ambidextrous mag release. Mag release lies flat in
line with trigger guard and presses downward to release. Improved flip up aperature
target sites. True skeletonized side rail to accept any MTK style slide and
lock scope mount and ours comes with free factory mount .
Buttpad, sling swivels and much more. The barrel is fluted for accuracy and
has an internalized shark fin style built in muzzle break. Features the smoothest
action by far that I have ever felt on an AK Style bolt system.
Semi-Automatic , Comes complete with 1 five round and 1-ten round mag.
Chambers and fires the hard hitting .308 winchester cartridge. I Love This Rifle
!
Item # Vepr-Super-308..............$1099.99
Only the Super Vepr comes with the free Scope Mount
Add A Scope
What you see above is a .308 caliber Super Vepr with one of our cool
really affordable Barska 3x9x40 Scope.
Add an original Barska Scope and Rings to the order at a great price... See
accessories page for details.
Vepr Mags- Vapr Mags- Vepr Mags
10 Round Mag for 5.45x39..Item # V545-Mag-10...$29.99
10 Round Mag for .223.......Item # V223-Mag-10....$29.99
10 Round Mag for .308.......Item # V308-Mag-10....$29.99
5 Round Mag for 7.62x39...Item # V39-Mag-10......$29.99
5 Round Mag for 7.62x54r...Item # V545-Mag-10...$35.99