NOTICE: Placing an order for item(s) that require an FFL transfer? We HIGHLY recommend contacting your FFL before placing your order. Due to recent events it could be possible they are delayed, closed or not accepting transfers.
(This item has been previously added to your cart)
Sign up to be the first to know when this item is back in stock.
Premium Grade AR-15 Heavy Barrel, 18", 1 in 8 twist - ParkerizedGas port drilled for mid length gas set up, and threaded for comp.Barrel Extension in rear with feed ramps ready to install into receiver. .223 WYLDE
Don't forget the AeroShell 33MS Mil Spec Armorer's Grease!
This is a premium grade 18" Parkerized AR-15 Heavy Barrel from a highly respected U.S. contractor / barrel manufacturer.These premium barrels are renowned for their deep, crisp, and consistant rifling and extreme accuracy.When it comes to AR-15 barrels these stainless beauties are the granddaddy of them all. 1 in 8 twist, gas port drilled and set up for mid length gas system and threaded for any standard AR-15 compensator. .750 gas block size, .085 gas port diameterBarrel Extension in rear with feed ramps ready to install into any standard AR receiver.Barrel is chambered as .223 Wylde therefore properly chambering either commercial .223 Remington or 5.56 Nato rounds.
1 in 8 twist rate performs well with both heavy and light grain bullets
What a deal.......
Each parkerized barrel starts with 4140 Gun Barrel quality steel. Heat Treated and Stress Relieved to a hardness of Rockwell C 28-32. Or we use the 416 Gun Quality Stainless Steel for our Stainless Steel Barrels.
All barrels are manufactured on modern CNC equipment to completely machine the barrel. We drill, ream, rifle, turn, chamber ream, pin the Barrel Extension, drill the gas hole, and mill the flutes, all on late model CNC Equipment. The Barrels are manufactured under the ISO 9002 Quality System, and eachbarrel goes through a Final Inspection before shipping.
Please enter a valid email address