Mira Safety Tactical Gas Mask - Pre-installed Hydration System & Canteen - Full-Face Respirator for CBRN Defense - CM-6M

The CM-6M Tactical Gas Mask has a facepiece constructed of rugged Bromobutyl rubber for maximum resistance to TIC/CWA contaminants. The full-face respirator features an inner mask constructed from a special hypoallergenic compound that ensures excellent tightness and avoids exhaled air contact with the visor to prevent fogging. This masks also reduces carbon dioxide content in the mask’s inner space, which, together with its favorable inhalation and exhalation breathing resistance, decreases the user's physiological burden, providing more comfortable and practical all-day use in less than ideal conditions.

The integrated speech diaphragm is manufactured to ensure a 95% intelligibility of speech, allowing for easy communication with others. The mask is equipped with a five-point rubber-textile head harness to ensure a snug fit. The CM-6M CBRN gas mask is produced in one size. To ensure proper functioning, the user’s face must be smooth, free of facial hair, sideburns, and other hindrances at the points of contact. The tactical gas mask is compatible with the 3M Safety 6878 Spectacle Kit (sold separately), with simple installation for vision-impaired people and prefer not to wear contacts. 

The filter is fitted to the mask by screwing to the left or right inhalation chamber. The unused chamber (without filter) is sealed with an inhalation chamber plug. It is necessary to ensure the plug is properly screwed and tightened. Inhalation chambers of the CM-6 mask are ONLY compatible with Rd 40 x 1/7” thread per the EN 148-1 standard. The selection of a suitable filter depends on the type and concentration of the anticipated toxic agents. The CM-6 tactical mask equipped with a TIC or CWA filter is only safe for use in an environment containing at least 19.5% oxygen. The principles of filter selection and application are described in the filter user guides. The CM-6 tactical gas mask may be used in class 1 explosive environments only. The CM-6 mask meets all of the requirements for class 3 of the EN 136 standard. This mask is also a phenomenal choice for riot gear or as a riot control gas mask.