The New Ermox Defense XFire Pistol

First shooting impressions and context

The video revisits the Ermox Defense XFIRE after its initial appearance in a Glock clones overview. During that first range session, only one magazine was planned, but the host immediately loaded a second because the pistol grouped so well at about 15 yards. The XFIRE was shot better than a much more expensive Salient Arms-style build around $2,500, which prompted a dedicated follow-up. The pistol is described as a Glock-style handgun with a full metal body that still feels relatively light at about 28 ounces, comparable to some polymer pistols. The host notes that this full metal construction was initially overlooked in the earlier video and wants to correct that while focusing on how the gun actually shoots and handles for its price point.

Slide, optics cut, and fiber optic sights

The XFIRE uses a 4140 full steel ported slide. The porting reduces overall slide weight, making press checks and racking easier and slightly reducing reciprocating mass. This lighter front end is said to help keep the muzzle flatter as the slide cycles, with less dip when it returns to battery. The slide is optics-ready and comes with adapter plates for mounting various pistol red dots. The pistol ships with TruGlo-style fiber optic sights: green fiber optic rear sights and a red fiber optic front sight. The contrasting colors make the two green dots stand out while the red front centers quickly, which the host found noticeably faster to acquire than typical factory irons at this price level. A loaded chamber indicator on the slide provides both visual and tactile confirmation of a round in the chamber, and a three-slot Picatinny rail allows mounting lights or lasers.

Barrel design and Glock compatibility

The XFIRE features a 4-inch crowned barrel. The crown is highlighted as protection for the muzzle; if the outer edge is bumped or lightly damaged, the recessed crown helps preserve accuracy as the bullet exits. The barrel is interchangeable with standard Glock barrels, and the host demonstrates off-camera that a Glock 19M barrel can be installed in the XFIRE. Disassembly and takedown are Glock-style, with takedown notches that are described as more ergonomic than a typical Glock. Internally, the recoil system uses a dual guide rod recoil spring similar to Glock designs. The combination of a crowned barrel, Glock barrel interchangeability, and familiar takedown is emphasized as giving the pistol broad compatibility with existing Glock components while retaining its own full metal construction.

Trigger characteristics and grip panels

The trigger on the Ermox Defense XFIRE is compared directly to a stock Glock trigger in terms of weight, estimated around 5 pounds. However, the feel is described as noticeably better. The trigger shoe is flat, with a clear wall before the break and a crisp, positive reset that is easy to feel. This more ergonomic, flatter trigger is expected to translate into a better shooting experience than a standard Glock-style curved trigger. The frame uses interchangeable grip panels, with black panels installed from the factory and red panels included in the box. The red panels are shown on the pistol and are noted for having a pleasing tone that is neither overly bright nor too dull. These panels allow the user to choose between a more subdued black look or a red-accented configuration without changing the underlying frame.

Weight, recoil control, and shooting performance

Although the XFIRE is a full metal body pistol, it weighs about 28 ounces, which the host notes is similar to some polymer-framed handguns. The combination of metal construction and this weight is said to help keep the gun flatter under recoil compared to very light pistols. The earlier range session from the Glock clones video is referenced again: at roughly 15 yards, the host’s groups with the XFIRE were tight enough to surpass performance with a high-end Salient Arms-style pistol. That experience led to the conclusion that, for its price point, this is one of the most impressive Glock-style pistols the host has fired. The overall impression is that the weight, slide porting, and trigger characteristics work together to produce controllable recoil and consistent accuracy in practical shooting.

Magazine compatibility and controls

The Ermox Defense XFIRE ships with two 15-round magazines that follow a Glock-style pattern. The pistol accepts standard Glock magazines, including factory 15-round magazines and Magpul P-MAG Glock-pattern magazines. A 17-round Glock magazine with an extension to reach 20-plus capacity is also shown fitting and locking in place properly. The host notes that these various Glock-compatible magazines seat, lock, and function as expected, though live round chambering is not demonstrated on camera. The slide stop and release lever are in a familiar Glock-like position and operate in a similar way. This broad magazine and control compatibility is presented as a practical advantage for users who already own Glock pistols and accessories, allowing them to share magazines and parts across platforms.

Included case, accessories, and optic plates

From the factory, the XFIRE comes in a hard polymer pistol case similar to those supplied with other handguns. Inside the case is a user manual, the alternate set of grip panels (with the pistol typically shipping with black panels installed and red panels included separately), and a compact cleaning kit. The cleaning kit uses threaded rods that can be screwed together to form a longer cleaning rod, with different heads attachable for barrel maintenance. An Allen key is included for working with the optic adapter plates. Several adapter plates are provided so users can mount different styles of pistol red dots on the optics-ready slide. The host closes by inviting questions about the pistol, suggesting additional range content if viewers are interested, and mentioning that more detailed handling and disassembly footage is available on platforms with fewer content restrictions.