The video introduces the Glock 43X MOS in a special FDE configuration. The finish is compared to the Glock 19X, noting that the 43X slide has a more bronze tone while the 19X finish appears slightly different. The host explains that the focus will be on technical specifications and practical details of the pistol, including measurements and what is included. The Glock 43X MOS is presented as a compact, optics-ready variant in a color scheme that pairs a bronze-toned slide with an FDE frame, intended to appeal to those who prefer that black and FDE aesthetic.
The Glock 43X MOS is described as a slimline 9x19mm pistol with a 3.41-inch barrel. Factory magazine capacity is 10 rounds, and the pistol is designed around concealed carry. Weight without a magazine is listed at about 16.26 ounces, increasing to 18.55 ounces with an empty magazine inserted, and approximately 22.96 ounces when fully loaded. Overall length is about 6.5 inches from muzzle to the back of the magwell, with a slide length of 6.06 inches and an overall height of 5.04 inches. The pistol is noted as thinner and smaller than a Glock 19X, which may surprise users accustomed to larger Glock models.
Attention shifts to the construction and finish. The FDE color on the grip is part of the actual polymer, not a Cerakote layer, similar in concept to the Glock 19X where the frame color is molded in. The slide has an anodized finish with a bronze appearance that contrasts with the FDE frame. Standard Glock sights are installed, with a U-notch rear and a white front dot. The slide features both front and rear serrations, allowing different press-check techniques. The combination of anodized bronze slide and FDE polymer frame is highlighted as a visually cohesive setup for those who prefer this color pattern.
The pistol uses a left-side-only slide release and a standard Glock magazine release, operating as expected for the platform. It retains the Glock Safe Action trigger system, with a trigger safety tab that must be depressed before the trigger can be pulled. The host demonstrates the trigger break, describing it as typical for a Glock. A short Picatinny-style rail with a single cross slot is integrated into the dust cover, suitable for mounting compact lights or lasers. The slide is cut for optics under the MOS system, and the host notes the presence of a K-style cut on the MOS plate area, which is relevant for compatibility with certain micro red dot footprints.
The frame uses standard Glock stippling, providing a consistent texture around the grip. The host emphasizes that the Glock 43X allows a full firing grip for many shooters, which can aid control and follow-up shots compared to very short-gripped subcompacts. The grip length is contrasted with models like the Glock 26, which some shooters find more difficult to control due to reduced purchase. While acknowledging that preferences vary, the video notes that the 43X grip design helps maintain a solid hold during recoil, supporting accurate shot placement and quicker recovery between shots, especially for those who do not have very large hands.
The video covers what comes in the box with the Glock 43X MOS FDE. The pistol ships in a standard Glock hard case. Inside, buyers receive two 10-round magazines, giving a total capacity of 10+1 when one round is chambered. A Glock-branded magazine speed loader is included to assist with loading the magazines without straining fingers. The rest of the contents are described as typical for Glock packaging, such as manuals and standard accessories that accompany most factory Glock pistols.
The host then verifies weight using a scale on camera. The Glock 43X MOS FDE is weighed without a magazine, showing approximately 0.97 pounds. With an empty magazine inserted, the weight reads about 1.12 pounds. These measurements confirm that the pistol is lightweight and slim, reinforcing its role as an easily concealed 9mm handgun. The combination of low weight and thin profile is presented as a practical advantage for everyday carry, reducing bulk while still offering a full-height grip and 10-round magazine capacity.
A trigger pull gauge is used to measure the Glock 43X MOS trigger. The first pull, taken with the gauge positioned toward the lower portion of the trigger, registers approximately 4.77 pounds. A second pull, with the gauge placed slightly higher on the trigger shoe, measures about 5.6 pounds. The host concludes that the trigger falls in the 5-pound range, consistent with typical Glock factory triggers. The video ends by inviting feedback and questions about the Glock 43X MOS FDE, encouraging viewers to share their experiences and opinions of this slimline 9mm platform.
Loading...