Get A Free T-Shirt - Refer A Friend
FEATURED LONG GUN Italian M91 CarcanoGET YOURS
FEATURED HANDGUN Zigana PX-9SHOP NOW
Shop AllIn Stock AmmoSHOP NOW
(This item has been previously added to your cart)
Premium Grade AR-15 Heavy Barrel, 16", 1 in 8 twist , Parkerized finish. Gas port drilled for carbine length gas set up, heavy barrel, and threaded for comp.Barrel Extension in rear with feed ramps ready to install into receiver. .223 / 5.56 NATO
Don't forget the AeroShell 33MS Mil Spec Armorer's Grease!
This is a premium grade 16" Parkerized AR-15 Heavy Barrel from a highly respected U.S. contractor / barrel manufacturer.These premium barrels are renowned for their deep, crisp, and consistent rifling and extreme accuracy.When it comes to AR-15 barrels these beauties are the granddaddy of them all. 1 in 8 twist, heavy barrel, gas port drilled and set up for carbine length gas system and threaded for any standard AR-15 compensator. .750 gas block size and .070 gas port diameterBarrel Extension in rear with feed ramps ready to install into any standard AR receiver.Barrel is chambered as .223 Wylde therefore properly chambering either commercial .223 Remington or 5.56 Nato rounds.
1 in 8 twist rate
What a deal.......
Each parkerized barrel starts with 4140 Gun Barrel quality steel. Heat Treated and Stress Relieved to a hardness of Rockwell C 28-32. Or we use the 416 Gun Quality Stainless Steel for our Stainless Steel Barrels.
Every barrel is manufactured on modern CNC equipment to completely machine the barrel. We drill, ream, rifle, turn, chamber ream, pin the Barrel Extension, drill the gas hole, and mill the flutes, all on late model CNC Equipment. The Barrels are manufactured under the ISO 9002 Quality System, and every barrel goes through a Final Inspection before shipping.
16" Heavy BarrelParkerized1/8 TwistThreaded for Comp .223 / 5.56 Nato Gas Block sized at .750 .070 gas port diameter
Please enter a valid email address