The Ruger 10mm LC Carbine

Overview and 10mm threaded barrel

The video introduces the Ruger LC Carbine chambered in 10mm as a pistol caliber carbine that can also serve as a compact bag or backpack gun. The carbine uses a threaded 16-inch barrel with a thread protector, allowing the installation of a suppressor. The host notes that 10mm is a powerful pistol caliber, often regarded as a strong option compared to 9mm and sometimes described as a “bear killer.” Because 10mm can be loud, the ability to mount a suppressor is highlighted as a practical way to reduce noise and make the carbine more comfortable to shoot while retaining the power of the cartridge.

Sights, rail system, and free-float M-LOK handguard

The Ruger LC Carbine comes with spring-loaded flip-up sights included in the box, which deploy easily and function as expected. A full-length Picatinny rail runs along the top of the receiver and handguard, providing space for optics or additional accessories. The handguard features extensive M-LOK slots on multiple sides, and the barrel is free-floated inside the larger-diameter handguard. This spacing allows all visible M-LOK slots to be used without interference from the barrel, unlike some designs where the barrel sits too close. The handguard and top rail are made from high-grade aluminum, and the handguard is secured with four screws for rigidity, giving the carbine a solid feel in the hands.

Recoil, magwell, and ambidextrous controls

On the range, the 10mm LC Carbine has some recoil but less than expected, largely due to its overall weight, which helps tame the cartridge. The gun feels stable and comfortable to shoot. A slightly flared magwell makes magazine changes smoother, which the host notes during a simple drill involving firing two rounds, swapping magazines, and firing two more. The primary bolt release is located on the right side near where the index finger rests and requires deliberate pressure to send the bolt forward. Users are cautioned to keep thumbs clear of the moving bolt when using the opposite hand. The safety is ambidextrous and thumb-actuated on both sides, similar to a pistol-style safety. There is also a second, thumb-actuated bolt release, giving the carbine ambidextrous bolt controls as well.

Trigger, magazine release, and bottom Picatinny rail

The trigger includes an integrated trigger safety tab that must be depressed before the trigger can move. There is a short initial take-up followed by a bit more movement, then a distinct break as the trigger contacts the rear of the trigger guard. The reset involves a small amount of forward travel before becoming springy and resetting, after which the trigger can be pressed again. The pull weight feels roughly in the 4 to 5 pound range, appropriate for a pistol caliber carbine where an extremely light trigger is not desired. The magazine release is located on the left side only, positioned where the thumb naturally rests on the pistol grip, and it drops the large magazine cleanly. A Picatinny rail section on the bottom of the handguard allows mounting a vertical grip or other accessories closer to the shooter, or the user can adopt a C-clamp grip farther forward, providing several setup options.

Grip texture, folding stock, and 1913 interface

The pistol grip has aggressive texturing that feels more secure in the hand than it appears visually. There are smoother sections between the textured areas, so shooters with smaller hands may not contact all the aggressive surfaces, but the host reports no issues maintaining control even with sweaty hands during range use. The stock is a key feature: it folds to the side for compact storage and transport, then locks out solidly when deployed. It attaches via a 1913 Picatinny rail interface at the rear of the receiver, so any compatible 1913 stock can be installed if a different configuration is preferred. The stock is adjustable for length of pull, allowing users to set it to their preferred position before folding it. A rubber buttpad helps mitigate the remaining 10mm recoil, working in combination with the carbine’s weight to keep the gun manageable.

Specs, Glock mag compatibility, and caliber options

The Ruger LC Carbine in 10mm weighs about 7.4 pounds and uses a 16-inch threaded barrel with a 1:16 twist rate. The overall length is approximately 30.6 inches. The thread pattern is 5/8x28, enabling straightforward suppressor or muzzle device installation. The carbine ships with flip-up sights and a standard rifle-capacity magazine that is compatible with Glock-pattern 10mm magazines, allowing the use of various 10mm Glock mags. The platform offers extensive M-LOK slots, a full-length Picatinny rail on top, and an additional Picatinny rail section on the bottom of the handguard. It includes ambidextrous bolt releases, ambidextrous safety, and two QD sling attachment points—one behind the receiver and one on the stock. The LC Carbine line is also available in other calibers, including 5.7x28 and .45 ACP, alongside this 10mm version.