The discussion opens with a common scenario: finding an old box of ammunition in a basement, attic, or at a relative’s house and wondering if it is safe to fire. The focus is on whether this old ammo should be used for training or even for self-defense. The answer is not a simple yes or no, because safety depends on several factors, especially how the ammunition has been stored and its current physical condition. The video sets out to explain what to look for, what risks exist, and how to decide if those old 9mm or other calibers can be used without damaging a firearm or endangering the shooter.
Storage conditions are presented as the first major factor in determining if old ammunition is safe. Ammo kept in a cool, dry, dark environment, such as a sealed ammo can, is more likely to remain reliable even after many decades. An example is given of shooting an M1 Garand with ammunition from an ammo can dated to the 1950s; every round functioned without issue. In contrast, ammunition stored in a humid environment can rust or corrode. Corrosion can prevent a proper seal in the chamber, causing gas leakage and potentially catastrophic failure. The key point is that age alone is not the problem; improper storage is.
The next step is a careful visual and physical inspection of each cartridge. A 9mm round that has been sitting for a long time is examined as an example. The projectile should not be sunk into the case or wobbling; it should feel tight and properly seated. The case itself should show no active corrosion, though simple discoloration is usually acceptable. Around the primer, the metal should appear intact without heavy corrosion, pitting, or odd protrusions. Ammunition that only shows color changes but no structural damage is generally considered usable. Rounds with corroded primers, damaged cases, bent projectiles, or obviously altered seating depth should be discarded rather than fired.
Old or poorly stored ammunition increases the risk of malfunctions such as duds, delayed ignition, and squib loads. A dud occurs when the primer is struck but the round does not fire. With old ammo, there is also the danger of a delayed discharge, where the round ignites seconds after the trigger press. Shooters are cautioned not to immediately look into the muzzle or hastily clear the gun if a click is heard instead of a bang, especially with questionable ammunition. Another serious concern is a squib load, where the projectile leaves the case but becomes lodged in the barrel instead of exiting. Firing another round behind a stuck projectile can destroy the firearm and injure the shooter. These risks are more likely when ammunition has unknown origins, such as old handloads or rounds from defunct manufacturers stored improperly.
The guidance is summarized into a simple process. When encountering old ammunition, inspect each round. Significant corrosion on the case or primer, damaged or bent projectiles, sunken bullets, or loose seating are reasons to discard the cartridge. Minor discoloration with otherwise intact components is usually acceptable for use. After inspection, old ammo that appears sound can be used for training and casual range shooting, starting with a few test rounds to confirm function and accuracy. For self-defense, the recommendation is to rely on new, modern ammunition with known storage history and current design materials, rather than aging or questionable rounds. Old ammunition is best reserved for practice, while defensive use should be limited to fresh, properly stored cartridges.
Loading...