The video focuses on the Heritage Manufacturing Rough Rider small-bore revolver chambered in .22 Long Rifle, featuring a 6.5-inch barrel. It is presented as a revolver suited for general range use and inexpensive plinking. The host notes that Heritage Manufacturing is based in Florida and briefly frames the Rough Rider as an option for shooters who want a revolver experience without high ammunition costs. The discussion centers on the specific configuration with a 6.5-inch barrel and traditional single-action revolver layout.
The Rough Rider uses a simple sighting system with a front dorsal-style post and a rear blacked-out sight. When the hammer is cocked, a small slit along the top of the revolver serves as the rear sight reference. The host explains that this .22 LR revolver may be used by new shooters, including children, so basic safety features are important. A manual safety lever is located at the rear of the frame. The lever is flipped down for “fire” and up for “safe,” providing a clear, mechanical way to secure the revolver when handling or demonstrating its operation.
The video highlights how the Rough Rider’s safety interacts with the hammer and firing pin. With the safety engaged, the hammer does not make contact with the firing pin, allowing the revolver to be dry-fired without striking the pin. When the safety is moved to the fire position, the internal parts shift slightly forward, placing the revolver in a ready-to-fire condition. This feature is presented as useful for teaching new shooters how a revolver operates while maintaining an added layer of safety, since the instructor can demonstrate trigger press and hammer movement without risking damage to the firing pin.
The host describes using the half-cock position to manage loading and unloading. With the hammer at half-cock, a small latch can be flipped down to open the loading gate area, allowing removal of cartridges that did not fire properly or clearing remaining rounds from the cylinder. The revolver comes with two cylinders in the box, each holding six rounds. To change cylinders, the base pin is pulled forward, the cylinder is removed, and the replacement cylinder is installed in reverse order. The host notes that the cylinder only fits one way, ensuring proper alignment when reassembled.
This Rough Rider variant features camo laminate grips with brown, dark brown, and green tones over a wood-grain pattern. The grips are described as comfortable in the hand and visually distinctive. The trigger is characterized as light, with no noticeable take-up, consistent with a typical single-action revolver. The trigger guard is relatively small but made of metal. Aside from the laminated wood grips, the revolver’s construction is described as all metal, with no polymer components, reinforcing a traditional feel in both handling and appearance.
The video concludes with key specifications for this Heritage Rough Rider configuration. It has a 6.5-inch barrel and uses six-round cylinders, with two cylinders included. Overall length is listed at 11.5 inches, with an overall height of 5.5 inches. The unloaded weight is stated as 33.2 ounces. The host notes that the revolver, combined with the relatively low cost of .22 LR ammunition, offers an economical way to spend time at the range with a distinctive single-action revolver platform. Viewers are invited to share their experiences with the Heritage Rough Rider in the comments.
Loading...