The video focuses on the CMMG Banshee FE MkGs 9mm Luger pistol, shown in a bronze finish. The host notes that CMMG offers this platform in numerous finishes and several configurations. It can be set up to use Glock magazines, as in the example shown, or CMMG’s standard 9mm lower that accepts different 9mm magazines. Additional caliber options include 9mm and .45, along with other offerings in the Banshee line. The discussion sets up a closer look at what comes with the firearm, its technical specifications, and how this particular 9mm configuration fits into the broader Banshee family of pistol-caliber carbines.
The Banshee FE MkGs discussed has an MSRP in the mid-$1,700 range. It uses a fixed ejector with a radial delayed blowback operating system, intended to feel softer in recoil than a typical straight blowback 9mm pistol. The barrel length is 5 inches with a 1:10 twist rate. The example shown wears a different muzzle device than the factory unit, which normally is more of a blast deflector. The thread pitch is 1/2x28, allowing compatibility with common 9mm muzzle devices and suppressor mounts. The upper receiver is billet 6061-T6 aluminum, while the lower is forged 7075-T6. Overall length is about 20.8 inches and weight is around 4.5 pounds, giving it a compact, lightweight feel for a pistol-caliber platform.
Moving from front to rear, the host highlights the compact handguard and its features. A small hand stop is installed, which helps keep the support hand away from a hot compensator or suppressor on such a short barrel. The hand stop also aids control when moving quickly. The handguard includes an M-Lok slot on the bottom and partial M-Lok slots on the sides for mounting accessories. A full-length Picatinny rail runs along the top for optics or backup sights. The current muzzle device is an aftermarket brake, but the key point is the 1/2x28 threading, which supports a wide range of 9mm muzzle options, including thread protectors, compensators, or suppressor mounts, depending on user preference.
The Banshee uses many CMMG-branded components. It has an AR9-style charging handle and AR-style safety selectors on an AR9 lower, allowing the use of standard AR triggers and compatible safeties. A large paddle-style magazine release is fitted for Glock magazines, designed for easy activation. The bolt catch and release on the left side follow a familiar AR pattern but are slightly enlarged as a CMMG part. The CMMG grip includes internal storage that can hold small items such as cleaning supplies. The grip has moderately aggressive texturing on the front and back and lighter texturing on the sides. It is relatively thin without a pronounced palm swell, and it can be swapped for other AR-style grips if desired.
At the rear, the pistol includes sling attachment points on the back of the receiver and on the brace itself, allowing various sling setups. The brace is adjustable and intended to function as a stabilizing brace, with the host noting it can be temporarily shouldered. A standard buffer tube is present, so the firearm could be configured differently if registered as an SBR, with other stock or brace options. In hand, the Banshee feels similar to a very short 300 Blackout AR-style pistol due to the compact barrel and familiar AR controls. The slightly flared magwell helps guide Glock magazines during reloads. The bronze Cerakote finish is described as well-applied, consistent with CMMG’s typical finish quality.
The trigger is described as lighter than expected for a factory unit. Using a gauge, the host measures several pulls and reports an average around 4.25 pounds. This light, clean pull complements the pistol’s overall weight of about 4.5 pounds, reinforcing its compact, easy-handling character. With the installed aftermarket muzzle brake, the overall length measures approximately 21 inches. Measuring from the barrel threads, the length is about 19.75 inches. With the brace fully extended, the overall length is roughly 22.25 inches. The exact length can vary slightly depending on the chosen muzzle device or a simple thread protector, but the platform remains short and maneuverable in all configurations.
The video wraps up by inviting owners of the CMMG Banshee to share their experiences and reviews. The host encourages questions about any details that may not have been covered in this brief spotlight, noting that additional discussion will continue in the comments. The emphasis is on education, constructive conversation, and supporting the broader firearms community. The presenter mentions plans to mount an optic on the Banshee and take it out for shooting, suggesting further evaluation beyond the tabletop overview. Viewers are encouraged to engage respectfully and contribute practical feedback on how the Banshee FE MkGs 9mm performs in real use.
Loading...