Hours: 9am-5pm EST  Mon. - Fri. Phone: (704) 774-1102
Hours: 9am-5pm EST  Mon. - Fri.
Phone: (704) 774-1102
View Cart
You have no items in your shopping cart.

AMD 65 AK Rifle Parts Kit : Hungarian, Pre-Barreled and Finished, Excellent to Like-New, Less Receiver

Availability: In Stock

  |  Item #: ACCAMD-65-KIT-BYB
MPN: amd65kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Video

Product specifications may vary from item in video.
Always verify product specifications on this product page.

Specifications

Product Specs

7.62x39 caliber
Accepts standard AMD 65 stamped receivers
When assembled accepts all AK-47 High cap mags and drums
New U.S. Barrel.
Entire rifle forward is pre assembled and original bolt is headspaced to barrel.
All unit is pre finished with a black parkerized finish
Professionally packaged.
Ready for final receiver assembly.  

Country of Manufacture United States
License Requirement None
Manufacturer FEG Hungary
Mfg. Part Number amd65kit
UPC 000000000000
Caliber/Gauge 7.62x39
Barrel Length No
Barrel Twist No
Barrel Bore Type N/A
Barrel Finish No
Barrel Fluting No
Barrel Profile No
Mount Type No
Beam Color No
Firearm Fit No
Threaded Barrel No
Condition New
List price 0
Free Shipping No

AMD 65 AK Rifle Parts Kit : Hungarian, Pre-Barreled and Finished, Excellent to Like-New, Less Receiver

Availability: In Stock

  |  Item #: ACCAMD-65-KIT-BYB
MPN: amd65kit

Hungarian AMD 65 Parts Sets Pre-Barreled and Finished Excellent to Like-New - Less Receiver
7.62x39 Caliber with New U.S. Made barrels.

MSRP: $449.99  | 
Your Price:  $319.99
MSRP: $449.99  | 
Your Price:  $319.99

Share this item:

Brutus' Description

Matching Numbers  - New US Barrel -  Newly Parkerized AK Variant

This is the coolest concept to come down the pipe in a long time. The hard parts are already done for you and the neatest thing is No FFL is Required. We ship direct to you. 

We call it the Backyard Builder Kit. 

These are Ultra High Quality and They Will Go Fast.  

Kit Includes:New ESS 4140 Chrome Moly (non-chrome lined ) 1 in 10 twist, 16.5” barrel, pressed into the front trunnion and properly headspaced. Checked with Go/No-Go Gauges and live round. (Disclaimer for legal reasons - Headspace must be rechecked by a competent gunsmith after final assembly).

Original Bolt, Carrier and Piston will actually come complete and seated into upper assembly

Rear Sight, Gas Block, and Front Sight installed in proper alignment and Parkerized

All Major Parts (bolt, carrier, front trunnion) have matching numbers. Gas Tube and Receiver Cover will be matching on most kits but not guaranteed

New Parkerizing on All Parts

All parts are original AMD 65 with the exception of the New US Barrel7.62x39 Caliber

Note - rear trunnion rivets must be removed (drilled) by end user

Photo Shows all parts included and is representative of the kits offered.

No Receiver Included.

End User would be responsible for building to 922r compliance standards. U.S. barrel installed counts as one part. 

Note - ( A U.S. mag not included  would count as 3 more ) Rifle in this configuration would need 6 parts total for U.S. 922r compliance, I would suggest a Tapco trigger set and U.S. mag as the easiest way to complete the parts count. This would actually = 7 parts total. 

Note 2 -We suggest Tapco AK mags for these . They are U.S. made ( so count as compliance parts ), come in 10, 20,and 30 round capacity and we have them at a great price. Know that the vertical fore grip on an AMD 65 will sometimes make the insertion of 30 round mags difficult due to having to angle the mags around the grip to insert. They will go in and out but the clearance is tight. However, the 20's work great and look good in the rifle. 

Specifications

Product Specs

7.62x39 caliber
Accepts standard AMD 65 stamped receivers
When assembled accepts all AK-47 High cap mags and drums
New U.S. Barrel.
Entire rifle forward is pre assembled and original bolt is headspaced to barrel.
All unit is pre finished with a black parkerized finish
Professionally packaged.
Ready for final receiver assembly.  

Country of Manufacture United States
License Requirement None
Manufacturer FEG Hungary
Mfg. Part Number amd65kit
UPC 000000000000
Caliber/Gauge 7.62x39
Barrel Length No
Barrel Twist No
Barrel Bore Type N/A
Barrel Finish No
Barrel Fluting No
Barrel Profile No
Mount Type No
Beam Color No
Firearm Fit No
Threaded Barrel No
Condition New
List price 0
Free Shipping No

Manufacturer's Description

Hungarian AMD-65 Parts Sets Pre-Barreled and Finished - Excellent to Like New - Less Receiver. AK Rifle Type 7.62x39 Caliber.

Others Also Viewed...



loading...

 
  Loading...