The video introduces the Magpul DT-PR stock as part of Magpul’s DT line, alongside the standard DT stock and the better-known CTR stock. The DT-PR is presented as a straightforward upgrade for AR-15 rifles using adjustable stocks. The host notes that many shooters are already familiar with the CTR, and sets up the DT-PR as a similar but distinct option with its own design details and handling characteristics. The focus of the discussion is how this stock behaves on an AR-15 platform and what differentiates it from other Magpul offerings.
The DT-PR stock weighs 10.7 ounces. Its width is 1.6 inches, height is 5.3 inches at the tallest point, and overall length is 7.4 inches. It offers approximately 3.3 inches of length-of-pull adjustment. The stock is designed for AR-15 style buffer tubes and is specifically sized for mil-spec tubes, though Magpul also produces versions for non–mil-spec tubes. The body is polymer with a textured finish that improves grip. The stock includes a replaceable butt pad that can be swapped for a thicker pad by removing the screws and installing an alternate pad.
The DT-PR stock uses a polymer construction with a noticeably grippier texture than the Magpul CTR stock, while maintaining a similar matte appearance. A cheek riser can be added to this stock if desired. The stock is intended for use on 16-inch AR-15 rifles or registered short-barreled rifles; installing it on a barrel shorter than 16 inches without proper NFA registration is noted as illegal. The adjustment lever is ambidextrous in use, allowing manipulation from either side. The stock includes a bag rest section with a flat surface and small lip for stability on a rear bag, as well as an ambidextrous QD sling attachment point and a traditional tie-in point for sling mounting.
Installation is demonstrated using the internal locking mechanism of the DT-PR stock. When the adjustment lever is pressed, a small piece at the top of the stock moves, revealing a hole that can be used to pull the internal lock clear of the buffer tube. An Allen key is inserted into this hole and pulled upward firmly to free the internal components so the stock can slide onto the buffer tube. The host emphasizes that a significant amount of force may be required and that the rifle should be oriented so the user can both pull the mechanism and guide the stock onto the tube. Once installed, the stock locks onto the mil-spec buffer tube with minimal movement.
The DT-PR stock incorporates a flat underside with a slight hook at the rear, allowing the shooter to rest it on a rear bag and adjust elevation more easily. That hook also fits into the shooter’s palm, making it easier to pull the rifle firmly into the shoulder for a stable firing position, especially when prone or shooting off a barricade. A small flat area near the rear of the stock provides a consistent surface to grip without interfering with the adjustment mechanism. The stock is designed to sit flush on a standard AR-15 mil-spec buffer tube; extended buffer tubes may leave a visible gap, which is mentioned as a normal fitment consideration rather than a defect.
The DT-PR stock is contrasted with the Magpul CTR stock. The CTR uses two separate mechanisms: a standard adjustment lever for moving along the buffer tube and an additional clamp that locks the stock in place to reduce movement. The DT-PR instead uses a dual-tension system built into its primary mechanism, resulting in a tighter fit on the buffer tube with very little wobble. This is contrasted with a generic stock, such as one from a Hi-Point, which can exhibit noticeable movement in multiple directions. The DT-PR and standard DT stocks are described as holding tightly on the tube, providing a more confidence-inspiring interface without excessive play.
The DT-PR stock is available in multiple colors, including black, flat dark earth, and olive drab green. A darker brown variant is mentioned as an upcoming color option. The stock typically sells for around sixty dollars, which is noted as being below the official MSRP, depending on the retailer. The presenter mentions owning the DT-PR and DT stocks personally since shortly after their release, with several months of use and positive experience. The stock is characterized as a worthwhile investment for AR-15 users seeking a tighter, more stable adjustable stock with practical features for precision and general shooting.
Loading...