The video opens at the Shield Arms booth with a detailed look at a new modular pistol platform built around a serialized chassis system. The core of the design is a fire control unit that drops into various frames, including polymer and metal options, plus configurations that mimic 1911-style grips or grip-chopped carry guns. The prototype on display resembles a Glock 48, complete with a beavertail and a gas-pedal-style support ledge to help manage recoil. Shield Arms explains that the pistol is engineered to accept internal parts from Glock 43, 43X, and 48 pistols, giving users access to a huge ecosystem of existing components. Magazine compatibility is a key selling point, with support for Shield Arms S15 and S10 magazines and plans for a full compatibility list before launch. The grip is intended to feature a removable backstrap so shooters can fine-tune hand fit and reach, underscoring the system’s emphasis on modular ergonomics and user-driven configuration.
The focus stays on Shield Arms as the host highlights how the modular pistol separates the non-firearm grip frame from the serialized component. The polymer grip module, expected to cost around $40, is not legally a firearm, allowing owners to experiment with stippling and texturing without risking damage to a serialized part. The actual firearm is a stainless steel fire control insert retained by two pins and the takedown lever. This insert is compatible with the Glock 19 Gen 3 ecosystem, meaning users can run common sights, slides, barrels, and triggers. Discussion turns to the platform’s potential as a base for chassis-style builds, including concepts reminiscent of the Flux Raider, with braces or stocks and accessory rails. While Shield Arms is not primarily marketing it as a PDW chassis, the design clearly invites third-party innovation. This segment underscores how the system blends Glock parts compatibility, modular frames, and a modern serialized insert to encourage extensive customization.
Attention shifts to Ruger, where the RXM pistol is introduced as a new 4-inch 9mm striker-fired handgun developed in collaboration with Magpul. The RXM is built around the Gen 3 Glock 19 ecosystem, deliberately aligning with one of the most supported aftermarket platforms in the world. Ruger and Magpul emphasize modularity and parts compatibility, positioning the RXM as a ready-made host for existing sights, holsters, and internal upgrades. Instead of a traditional black frame, the launch model features a stealth gray Magpul grip module, signaling a more modern aesthetic and accessory-driven approach. The video then covers Ruger’s ultra-light 10/22 variant, which uses a carbon fiber tension barrel to bring the rifle’s weight down to about 3.2 pounds. It wears a Magpul MOE XL2 stock with a distinctive splatter-paint texture for grip and visual appeal. With an MSRP of roughly $649, this 10/22 aims at shooters who want a lightweight, accurate rimfire with premium furniture straight from the factory.
The coverage moves to Arma Zeka, a small Czech manufacturer known for tightly fitted, CNC-produced pistols originally aimed at competition shooters. The presenter notes the exceptionally smooth slide feel and clean machining as hallmarks of the brand. This year, Arma Zeka is expanding into tactical and compact formats, showing a standard compact pistol and a compensated compact variant with an open slide and eye-catching blue finish. Both models emphasize ergonomics and control, with a modular grip system that allows users to swap grip sizes and backstrap shapes. A standout feature is the “palm lifter” backstrap, designed to raise the shooter’s hand higher into the beavertail for better recoil management and a lower bore axis feel. Grip panels are laid out to accept included sandpaper-style grip tape, giving extra traction, especially for smaller hands or high-speed competition use. The trigger is fully adjustable for position and pull weight, with single-action pull reportedly tunable down to around 0.8, highlighting the platform’s performance focus.
The next segment explains how certain European hunting regulations require an additional license to use long rifles, prompting creative firearm classifications. To navigate these rules, a Czech manufacturer developed a revolver-action carbine with a 16-inch barrel that is legally classified as a pistol. Chambered in .357 Magnum and .38 Special, this carbine offers hunters and sport shooters a way to enjoy rifle-like performance without the extra licensing burden. The host describes the felt recoil as surprisingly light, almost comparable to shooting .22, thanks in part to recoil-absorbing features built into the stock. Sight alignment is said to be intuitive and easy to maintain during rapid fire. The firearm operates in both double- and single-action modes, allowing straightforward load-and-shoot use directly from the cylinder. With an MSRP around $1,990, the carbine is positioned as a premium, niche product, praised for its high-quality machining, solid construction, and unique blend of revolver mechanics with carbine handling.
The video then spotlights Tony System, an Italian company specializing in advanced shooting components and competition upgrades. Their catalog covers many popular platforms, but the focus here is on full bundle kits, particularly for pistols like the Beretta 92X Performance. These bundles package matched parts such as magwells, grips, magazine releases, recoil springs, and other performance components into a single, coherent system. Priced around $900, the kits are marketed as better value than buying each part individually, with estimated savings of about $100. The host notes that the complete setup can be installed in roughly 40 minutes, making it accessible even for shooters who are not professional gunsmiths. All components are CNC machined to tight tolerances, and Tony System is highlighted as an official supplier for a demanding, high-standard client, reinforcing their reputation for quality. Customer feedback is described as uniformly positive, underscoring the reliability and performance benefits of these competition-focused upgrade packages.
In the final segment, Bryce from CRKT presents the Provoke X, a folding tactical tomahawk designed by Joe Caswell. This tool is engineered to be pocket-friendly while retaining the impact and utility of a compact axe. It uses CRKT’s deadbolt lock system combined with a safety mechanism that allows the blades to nest securely within the frame when not in use. With a firm flick, the tomahawk deploys into a locked, ready position, delivering a solid, confidence-inspiring feel. The host briefly tests the deployment, demonstrating how quickly it transitions from carry to use. The Provoke X is positioned as a specialized option for tactical users, outdoors enthusiasts, or collectors interested in innovative folding tools. The video concludes with closing remarks marking the end of the SHOT Show 2025 coverage, and viewers are directed to the main Classic Firearms channel for additional booth content and more in-depth looks at other products from the show.
Loading...