The video introduces the MTM Case-Gard ACDC30 ammo crate, highlighting that ACDC30 is the actual model designation. The crate is presented as an affordable option at $15.99 with the capacity of roughly four regular ammo cases. It is positioned as a practical solution for organizing ammunition rather than carrying multiple smaller boxes. The discussion frames the ACDC30 as suitable for range trips or general storage, especially for users who want to keep different ammunition types separated without investing in several individual containers.
The presenter focuses on the crate’s color, describing it as similar to the FN-style tone seen on rifles like the SCAR. It is compared to a “moon boot” shade with a bit more brown, and also likened to the color of a BCM grip. The video clarifies what it does not match, noting that it is definitely not the typical Sig color, which tends to have more orange or brown mixed in. These comparisons are used to give a clearer visual reference for viewers who are familiar with common firearm furniture colors.
The MTM ACDC30’s external dimensions are listed as approximately 21 inches long, 11.2 inches wide, and 7.2 inches tall. Internal measurements are given as about 17.7 inches in length, 8.66 inches in width, and 6.6 inches in height. These figures are emphasized to help users understand how the crate will fit in a safe, vehicle, or storage area, and what size ammo boxes or gear can be placed inside. The segment underscores that the crate is sized to replace several smaller ammo cans while remaining manageable to carry.
Attention shifts to the crate’s construction and functional features. The MTM ACDC30 uses a rubber ring around the lid that seals against the lower half, secured by two latches. It includes heavy lift handles on the sides and is rated to hold up to 75 pounds of contents. The crate is also designed to be stackable, allowing multiple units to be stored efficiently when managing several firearms or multiple loads of the same caliber. The material is described as high-impact polypropylene, contributing to its sturdiness and ability to support the stated weight.
The video explains that the interior can be configured with three dividers, creating four separate compartments, or used as one large open tote. This flexibility is presented as useful for separating different calibers, grain weights, or bullet types. To illustrate capacity, the presenter loads boxes of .40 Smith & Wesson Speer Gold Dot ammunition into one compartment. Eight boxes fit comfortably, with the possibility of squeezing in a ninth. The crate can also hold loose ammunition because the dividers extend fully to the bottom, helping keep contents organized within each section.
The function of the divider channels is demonstrated in more detail. Each divider locks into place with a small latch and slides into channels that run all the way to the bottom of the crate, engaging grooves along the sides. This design keeps the dividers from shifting under load, maintaining separation between different ammunition types. The crate is described as suitable for safe storage or transport to the range, particularly for users with multiple calibers or various loads of the same caliber. The watertight seal is mentioned as beneficial when combined with moisture-wicking material inside.
In closing, the video reiterates that the MTM ACDC30 is sold as an empty ammo crate and does not include ammunition. The exterior is described as having a matte texture. Viewers are encouraged to share experiences with MTM cases and to leave questions about details such as feel, fit, or other practical considerations. The presenter notes an intention to respond to comments and mentions planning how to integrate the crate into an existing safe setup, underscoring its role as a straightforward storage and organization tool for ammunition.
Loading...