The video opens at Brandon Herrera and Donut Operator’s range day with the host lighting off the AK-50. Despite launching .50 BMG, the rifle shows surprisingly soft recoil, with the shooter commenting on how controllable it feels on the AK platform while still throwing an impressive fireball downrange. The focus then shifts to the Tisas booth, where a new M45A1 Raider is introduced as a much more faithful clone of the USMC M45A1 than the earlier Raider. The Tisas representative explains that the first Raider was a solid pistol but missed the mark on true clone correctness, especially in color and small details. This new version updates the slide serrations, uses three white-dot Novak-compatible sights, and revises the hammer and beavertail grip safety. He also notes a design philosophy of using milled parts instead of MIM for critical moving components, emphasizing durability and long-term reliability in a hard-use 1911-style pistol.
The discussion digs deeper into the controversy around MIM, or metal injection molded parts. The Tisas team acknowledges that MIM has a bad reputation from earlier, poorly executed examples, and while it can work when done correctly, they chose to avoid the MIM label entirely on this gun to reassure buyers. Attention turns to the redesigned G10 grip panels for the Raider/M45. The representative explains how layered G10 material is pressed and then shaved to reveal specific color patterns, allowing them to closely mimic the look of the original Marine Corps pistols. Grip screw sizes have been enlarged to better match the original Raider’s proportions and improve durability. This segment underscores how much effort went into small, enthusiast-focused details, from texture and color layering on the grips to the decision to stick with fully machined internals for a more robust, clone-correct fighting pistol.
Next, the video highlights the slide and frame markings that complete the M45A1-inspired look. The Tisas pistol carries a functional QR code on the slide that actually links to the Raider product page, blending modern utility with clone aesthetics. There is also a cage-number-style marking that cleverly incorporates 1993, the year Tisas was founded, as a nod to the original Colt M45A1’s military-style identifiers. The rail has been revised to better match the USMC pistol, and this clone omits slide cuts and a threaded barrel to stay true to the service configuration. The front bushing is carefully color-matched to the rest of the gun, and overall fit is tightened compared to the earlier Raider. The hosts talk about how this M45A1-style 1911 lands in the roughly $600 price range, making it far more accessible than original Colt M45A1 pistols, which are expensive and increasingly rare on the collector market.
The Tisas representative emphasizes that, despite the approachable price, the M45A1-style pistol uses forged slides, forged frames, and cold hammer forged barrels. Internals are fully machined with no MIM parts, reinforcing the earlier point about durability and quality. They note that in their experience the guns have run without malfunctions, even under extended use. The Cerakote finish is matched to the original M45A1 color code, and the conversation touches on the history of Marine-issued pistols. Early guns had Cerakote that tended to flake, which later led Colt to produce darker bronze PVD-coated versions. Interestingly, some collectors now prefer the worn, flaked Cerakote look because it shows real service history. The segment then branches into other Tisas 1911 projects, including an upgraded double-stack 1911 and a World War II–style Remington Rand clone. That WWII pattern has a strong collector following, and Tisas is working to replicate its classic lines and features as closely as possible.
The focus shifts from 1911s to Tisas’ modern pistols. They mention the PX57 and a new threaded-barrel version, then spotlight the PX9 Gen 3, a polymer-framed 9mm that has evolved significantly from earlier generations. On the range, a PX9 Gen 3 is shot with a Latex Drake 9 suppressor attached. The shooters remark on how incredibly soft-shooting the gun is when suppressed, with noticeably reduced recoil and muzzle flip. The trigger has been upgraded, and the slide serrations and controls are improved for better handling and manipulation. The hosts comment that Tisas as a company has come a long way in refinement and quality. There is also a tease of an unrevealed new 9mm pistol from Tisas, described as distinct from the PX9 and aimed squarely at the dominant 9mm market. Amid joking references to .45 ACP as “God’s caliber,” the segment underscores how central 9mm has become for both defensive and range use.
At the Advantage Arms area, the video showcases a massive prototype suppressor system built around .86 Blackout. The unit is intentionally overbuilt, with walls roughly three times thicker than a production can, serving as a test platform to chase maximum quiet performance before slimming the design down. Using a DBZ sound meter, they report readings around 121–123 dB with subsonic 300 Blackout ammunition, impressively quiet given the noisy range environment. The designer explains that this heavy rig is just a first step, and future versions may incorporate carbon fiber inserts and other weight-saving measures. The concept is to perfect the internal geometry and gas management at full size, then gradually shrink and lighten the system while preserving the same sound reduction. This segment sets the stage for an integrally suppressed-style AR-15 upper that blends handguard and suppressor into a single, cohesive package.
The integrally suppressed-style AR-15 system is examined in more detail. The suppressor and handguard assembly threads onto the barrel using a standard 1/2x28 interface and bears against the barrel nut, creating a rigid, aligned structure. Internally, the system taps barrel gases before the bullet exits, similar to an integral design, which helps strip energy and reduce sound before the projectile leaves the muzzle. Metering on the DBZ sound meter has shown around 121–123 dB with subsonic 300 Blackout, which is extremely quiet for a rifle platform. The designer notes that this is an early prototype, only three to four months into development, with another three to four months of refinement anticipated before it could approach market readiness. The minimum planned product configuration is a complete upper assembly including barrel and suppressor, and they are considering partnerships with lower manufacturers. The example shown is mounted on an FN lower, illustrating compatibility with standard AR-15 components.
Attention returns to the firing line with an 8.6 Blackout rifle running 285-grain subsonic ammunition. The host describes it as possibly the quietest rifle-caliber setup he has ever shot, and a single round into the berm highlights how subdued the report is. The spotlight then moves to Brandon’s unconventional suppressor prototype, nicknamed the ribbed unit. Instead of traditional baffles, it uses a three-dimensional Tesla valve-inspired internal structure to route gas around and along the bullet path. The design goal is not absolute silence but a meaningful reduction in blast and sound to mitigate hearing damage, especially for hunters and home-defense users who may fire without ear protection. Despite being only about 2.5 inches long and 2 inches in diameter, the device can reportedly drop 5.56 from roughly 165 dB to around 145 dB on an AR, and down to about 141 dB on a bolt gun. That is slightly above strict hearing-safe levels but dramatically less punishing than an unsuppressed rifle.
The hosts then shoot a rifle equipped with an extremely small 5.56 suppressor, continuing the theme of compact muzzle devices. Even with hearing protection on, they immediately notice that the concussion is far lower than expected for such a tiny can. Brandon explains that the design philosophy is to push gases back into the barrel and release them over a longer period rather than dumping everything at once at the muzzle. He likens it to slowly letting air out of a balloon instead of popping it, which reduces the sharp crack and blast that typically batter the shooter and bystanders. This approach focuses on gas management and pressure timing rather than simply adding volume. Live fire impressions back up the theory, with shooters commenting that the rifle feels smoother and less abusive, suggesting that even ultra-short devices can offer meaningful benefits when the internal flow path is carefully engineered.
Following the micro suppressor, a new flash hider design is introduced. It is described as a very effective and exceptionally quiet flash hider that can match or even outperform a standard A2 birdcage in flash reduction while also softening the report. Because it is legally just a flash hider, it can be sold in restrictive states like California where suppressors are banned. Brandon claims that, in open terrain, it can reduce the distance at which gunfire is clearly heard from around 2000 meters down to roughly 850 meters. On the range, shooters note low concussion, smooth recoil characteristics, and even some compensating effect thanks to its mesh-like structure and multiple gas-dissipating surfaces. The segment closes with a look at Brandon’s ongoing experimental work, including a prototype SD-style gun that currently has a ray-gun appearance but hints at future integrally suppressed concepts and further innovation in muzzle and gas-control technology.
The final segment touches several topics in quick succession. Due to audio issues, the host narrates over B-roll of Goat Guns, highly detailed miniature replicas of firearms such as M16s, M4s, MP5s with a functional slap, and an M1 Garand that still delivers the iconic ping. The video then visits with Gun Owners of America and Ben, stressing the importance of supporting GOA’s efforts to defend gun rights and push back against restrictive legislation. Another lost-footage recap covers LGO Arms and the Laugo Alien lineup. They shot the Laugo Alien Suppressed, the Alien Creator with a 1911-like grip angle that felt more natural for the host as an American shooter, and the compact Remis aimed at concealed carry. All share an extremely low bore axis, possibly the lowest in the world, which contributes to flat shooting and fast follow-up shots. The video wraps up from Pro Gun Vegas with machine guns chattering in the background, thanking PTR for their hospitality and asking viewers what part of the range day they enjoyed most.