The video opens at Take Aim Range on a sunny day with Clint from Classic Firearms introducing a simple experiment. He has Aguila .22 Long Rifle Pistol Match ammunition and mentions that he has liked Aguila products for a long time, including talking with the company at the NRA Annual Meeting. His question is whether this pistol-focused match load will still run well in a rifle. Aguila lists the .22 Pistol Match as being tuned for barrels around 4.75 inches, but Clint wants to see how it behaves in a Mossberg Blaze with a 16-inch barrel. Using the Blaze with no optic, he lines up by looking along the Picatinny rail and front sight as a rough sight picture and starts shooting steel. Even though he jokes about not being the best shot and not having a dot, his initial strings of fire show that the Aguila .22 Pistol Match cycles and functions just fine in the rifle-length Mossberg Blaze.
After confirming that the Aguila .22 Pistol Match runs in the Mossberg Blaze, Clint talks about using the same load in the Glock 44 .22 LR pistol. The Glock 44 has been the subject of a lot of online discussion and debate, especially about how picky it might be with different loads. In his experience so far, the pistol has run well with this Aguila match load, suggesting that this particular ammunition feeds and cycles reliably in his sample Glock 44. He notes that he only has a limited number of magazines through the gun so far, including his first time shooting it at SHOT Show Range Day, but he has enjoyed it every time. He describes the combination of the Glock 44 and Aguila .22 Pistol Match as a fun, soft-shooting setup that appears to work consistently in his hands.
Footage from SHOT Show cuts in, featuring Scotty from Glock discussing the development and design of the Glock 44. He explains that the pistol was in development for several years, with Glock working through setbacks to achieve the level of reliability people expect from the brand. The Glock 44 uses a hybrid slide design: a polymer outer structure with multiple polymer components that snap together over a DLC-treated steel core, similar in surface treatment to Gen 5 centerfire slides and barrels. This construction is intended to achieve the right slide weight and balance so the pistol will run with a broad range of .22 LR loads, from premium match offerings to more economical bulk options. Scotty emphasizes that all major parts are produced by Glock rather than being a conversion kit, which helps avoid some of the compatibility and function issues that can show up with aftermarket .22 conversions. The Glock 44 is built around the Glock 19 profile, so the grip, controls, and overall feel are very similar. It fits Glock 19 holsters and uses magazines sized to mimic the 19 footprint, which makes it a natural trainer for those who already carry or practice with a Glock 19.
Scotty goes on to demonstrate how the Glock 44 fieldstrips and how its internal layout will feel familiar to anyone used to other Glock pistols. To take it down, the pistol is cleared, the trigger is pressed, and the slide is removed using the same takedown levers and motion as centerfire models. Once the slide is off, the barrel has a small amount of fore-and-aft movement and locks in place so it does not simply fall out; it is removed by sliding it forward and lifting it out. Internal slide components such as the firing pin assembly, firing pin safety, extractor, and related parts are serviced in the same way as other Glock pistols, including pushing down the firing pin spacer sleeve and removing the slide cover plate. Scotty cautions users not to try to separate the polymer outer pieces from the steel core of the hybrid slide, as that assembly is not intended to be taken apart by the end user and would likely need factory attention if disturbed. The frame uses a polymer locking block, but overall the disassembly steps and internal layout are kept as close as possible to other Glock models so that training, cleaning, and parts handling remain intuitive for existing Glock owners.
Back on the range, Clint talks about how the Glock 44 serves as a useful training pistol for shooters who already run a Glock 19. The grip angle, controls, and general ergonomics closely mirror the 19, but with much lighter recoil and overall weight thanks to the .22 LR chambering and hybrid slide. He then returns to the Mossberg Blaze, continuing to run Aguila .22 Pistol Match through it. Additional magazines confirm that this pistol-labeled match load continues to cycle reliably in the rifle. Clint points out that using the Picatinny rail as a crude rear reference with the front sight is not ideal for precision and suggests that adding a red dot or other optic would make better use of the Blaze’s optics-ready configuration. He describes the Mossberg Blaze as a lightweight, easy-handling .22 LR rifle with a Kryptek-style camo finish and sling attachment points, making it a handy option for plinking, hiking, camping, or as a first gun for new shooters. He mentions that it fills a similar niche to other popular .22 platforms like the Ruger 10/22 and various Henry .22 rifles, giving shooters another approachable rimfire choice.
The video wraps up with Clint highlighting a Classic Firearms promotion featuring a Barrett M82 .50 BMG rifle equipped with a Zeiss optic. He reminds viewers that there is limited time left to enter and explains that entries are handled through ClassicFirearms.com by clicking the giveaway banner, completing listed actions, and using referral links to boost entry counts. He references a previous Barrett M107 giveaway winner as an example of past big rifle promotions. Clint then points viewers to the selection of Aguila ammunition available on the site, including the .22 LR Pistol Match load used in the video, along with common calibers such as 9mm, .45 ACP, and 7.62 options. He reiterates that the Aguila .22 Pistol Match ran well in both the Glock 44 pistol and the Mossberg Blaze rifle during the day’s shooting, even though it is marketed primarily as a pistol-oriented match load.
Loading... 
