The video opens at Take Aim Training and Range with a compact 9mm AR-style pistol on the line. The pistol shown uses a 5-inch barrel, an SBA3 pistol brace, and a Sig red dot sight. An ETS translucent 31-round magazine is loaded, and the shooter performs a short mag dump to demonstrate how the gun behaves under rapid fire. The pistol is described as very comfortable and easy to control, with a subtle recoil impulse that makes it pleasant to shoot. The focus is on the compact 9mm AR pistol format and how enjoyable it is on the range.
The pistol is identified as an AR-style 9mm with a 5-inch barrel and a threaded muzzle protected by a thread protector that uses an O-ring to keep it from backing off. It ships with a single 31-round ETS translucent magazine, allowing the shooter to see remaining ammunition and the internal spring. The video notes that this can be useful in a practical setting and is also visually interesting. Additional shooting highlights the recoil impulse, which is described as very manageable. The gun is not extremely light but not heavy either, and the billet upper and lower receivers help mitigate recoil when firing standard 115-grain 9mm ammunition. The last-round bolt hold-open is shown functioning at the end of a string of fire.
The pistol is described as an American-made 9mm AR pistol, with the example in the video configured with an SBA3 tactical brace. Other brace options mentioned include a KAK brace or no brace at all for those planning to register the firearm as an SBR and install a stock and vertical grip. The pistol uses an M-LOK handguard with a single row of M-LOK slots around most of the circumference, leaving a continuous Picatinny rail at 12 o’clock. This layout supports mounting lights, lasers, and angled or vertical grips, depending on configuration and legal status. The threaded barrel is noted as suitable for adding different muzzle devices or a suppressor once the thread protector is removed, with the host planning to verify the exact thread pitch in the comments.
Back at the bench, the barrel and rail are revisited, again noting the approximate 1/2x36 thread pitch and the O-ring-equipped thread protector that resists loosening under use. The M-LOK rail provides one slot position around most of the handguard, with full-length Picatinny on top for optics or backup sights. The pistol features billet upper and lower receivers with distinctive angular lines and an integrated, enlarged but closed trigger guard. The machining and overall appearance are emphasized, with the gun described as visually more interesting than many plain AR-pattern pistols. A clover-style manufacturer logo is visible on the receiver. The pistol is said to balance well, with an estimated loaded weight in the high six-pound range, contributing to its stable shooting characteristics.
The pistol retains familiar AR-style controls, including a standard bolt catch, safety selector, and A2-style pistol grip, which can be swapped for other AR-compatible grips. The trigger is described as a mil-spec style unit with almost no take-up before the wall and an estimated pull weight around six pounds. The break is clean, and the reset is distinct, supporting quick follow-up shots on target. The integrated trigger guard is enlarged enough to accommodate gloved shooting while remaining part of the billet lower’s design. An oversized magazine release is positioned where the trigger finger naturally rests when off the trigger, making magazine changes straightforward. During range use, the ETS magazine drops free cleanly, and the overall control layout is presented as intuitive for anyone familiar with AR platforms.
The rear of the pistol uses a pistol-length buffer tube. Buyers can choose to receive it with no brace, with an SBA3 brace, or with a KAK brace, depending on preference and intended configuration. The SBA3 brace shown provides a comfortable cheek weld and includes a QD sling attachment point at the rear. With an additional QD mount on the M-LOK handguard, the pistol can be set up as a compact, sling-supported firearm. It is optics-ready and does not ship with an optic installed. In the video, a Sig red dot sight is mounted on the top Picatinny rail to demonstrate a typical setup. A Maglula-style loader is used off-camera to load the ETS 31-round magazine, with a note that such loaders help preserve the shooter’s thumbs when filling double-stack pistol-caliber magazines.
The pistol is summarized as a 9mm AR-style firearm with a 5-inch threaded barrel, billet upper and lower receivers, M-LOK handguard with top Picatinny rail, and AR-pattern controls. It ships with a 31-round ETS translucent magazine and can be ordered with different brace options or without a brace. The gun is highlighted for its controllable recoil, comfortable handling, and straightforward customization for lights, lasers, grips, slings, and optics. Toward the end of the video, a separate Classic Firearms giveaway is mentioned: an FN SCAR 17 chambered in 7.62 NATO, including a special gold-finished version featured in a Texas Plinking video. Viewers are encouraged to watch that content and to subscribe to stay updated on products and giveaways featured by Classic Firearms.
Loading... 
